Voyager Solid / VOYAGER SOLID L MS E1/3-S WH

96637633

Data Sheet

LED safety luminaire with antipanic optic for surface, wall or ceiling, mounting. Simple "click" mounting after installation of base housing.
Housing made of polycarbonate (PC), back side white (similar RAL 9016), cover transparent.
Quick fit terminal block, through wiring possible up to 2,5 mm².
Self-contained luminaire with integrated LiFePo4 battery pack. Emergency operation time selectable via jumper for 1h or 3h (default). Maintained (default) or non-maintained operation possible.
Manual test, luminaire status display via status LED.

Vin: 230V AC +/-10%, Degree of protection: IP65
Ta=0°C to +40°C Impact strength: IK08
Weight: 0.77 kg Class II electrical

Warranty: Self-contained emergency luminaires rely on long-lasting batteries. Voyager Solid's high-tech battery is robust and comes with a three-year guarantee (applicable subject to the terms and conditions of and to the extent as set forth in the manufacturer's guarantee on Thorn products, which shall be applicable analogously and which is available under http://www.thornlighting.com/en/products/5-yearguarantee/5-year-warranty/terms-of-guarantee_en.pdf. The battery guarantee shall not come into effect if the product has been installed later than three(3) months after delivery EXW (Incoterms 2010).

Accessories:

Set of ISO 7010 mountable direction sign inserts (left, right, up, down) for viewing from a maximum distance of 26m, for single sided view.

Installation frame for semi recessed luminaire installation.

Mode selection
  • Lamp position:With opal insert - 230V operation maintained
  • Light Source:LED
  • Luminaire luminous flux*:165 lm
  • Luminaire efficacy*:69 lm/W
  • Rated median useful life*:L90 50000 h at 25 °C
  • Luminaire input power*:2.4 W
  • Maintenance category CIE 97:E - Dust-proof IP5X
  • LED
  • CE
  • IK08
  • IP65
  • Ta = 0 to +40
  • UKCA

Photometry

Photometric configuration

CalcExpress

Use CalcExpress to quickly carry out quick online calculations of required indoor luminaire numbers for rectangular rooms. Enter the calculation parameters for your solution such as room dimensions, mounting height, height of the useful plane and required level of illuminance, and the site will instantly suggest a solution according to the light output ratio method.

Step 1: Technical data
(lm)
(m)
(m)
(%)
Step 2: Room Data
(m)
(m)
(m)
(m)
(%)
Step 3: Result
(lx)
(%)